Products

The M210EA-CZ and CZR conventional zone monitor modules allow a zone of IS conventional detectors to be connected to a System Sensor analogue addressable system.

The M201EA–240 module is part of the new family of input/output modules in System Sensor Europe’s Series 200 plus range.

The new M200 look and feel combine maximum reliability with top-end functionality. Their unique mechanical design allows each module to be mounted in either a common wall box, on a DIN rail or its dedicated enclosure.

The OSI-RIE-xx is an intelligent reflector- type linear optical beam smoke detector that includes an 8" reflector and an integral sensitivity test.

The OSI-RE-SS is a 4-wire, single-ended, reflected type beam smoke detector that includes an 8" reflector and an integral sensitivity test.

The Agile™ Wireless Sounder Strobe forms part of the Agile range of products that cover a wide range of applications where wiring is undesired.

6500E and 6500SE are addressable reflector-type linear optical beam smoke detectors, designed to operate as a component of an intelligent fire alarm system and typically used for protecting buildings with large open spaces.

The 6500RE and 6500RSE are conventional reflector-type linear optical beam smoke detectors, designed to operate as a component of an intelligent fire alarm system and typically used for protecting buildings with large open spaces.

This System Sensor base is designed for use with all 500, 200, 200+ and 200 Advanced intelligent ranges of sensors and their variants. The standard B501AP is white, an IV suffix indicates the base is ivory in colour, a BK suffix for black.

Single and multi-way models with unique mechanical design: maximum flexibility in mounting, same mechanical package, reducing both the cost of installation and the mounting space required.

The FAAST In-line Filter is designed to offer improved installations in a wide array of harsh environments with the highest levels of airborne contaminants.

The FAAST LT-200 Aspirating Smoke Detector is designed with the installer and end user in mind to serves the wide variety of Class C applications.

The Agile™ Wireless Smoke detector forms part of the Agile range of products that cover a wide range of applications where wiring is undesired.

The Agile™ Wireless Gateway forms part of the Agile range of products that cover a wide range of applications where wiring is undesired, connecting the Agile range of products into System Sensor protocol loops.

The Agile™ Wireless Smoke detector forms part of the Agile range of products that cover a wide range of applications where wiring is undesired.

The Agile™ Wireless Thermal detector forms part of the Agile range of products that cover a wide range of applications where wiring is undesired.

The Agile™ Wireless Gateway forms part of the Agile range of products that cover a wide range of applications where wiring is undesired, connecting the Agile range of products into System Sensor protocol loops.

The InnovairFlex™ DNRE intelligent non-relay photoelectric duct smoke detector features versatile mounting options in square or rectangular configuration with modular construction.

The DST family of sampling tubes are pieces of steel piping with a series of holes drilled the entire length of the tube and should extend the entire width of the duct.

The M200E-SMB Surface Mounting Box is an Interface Enclosure suitable for the System Sensor addressable modules range.

The M210E-CZ and CZR conventional zone monitor modules allow a zone of conventional or IS conventional detectors to be connected to a System Sensor analogue addressable system.

The M501MEA is a mini-addressable input module. It will interface with contact devices such as security contacts, waterflow switches and call points. It is capable of being connected in Class B wiring configurations.

The Series 200 Photoelectric Smoke Detector range delivers a consolidated, reliable, high-quality detector platform with digital communication, suitable for medium-to-large applications with simple installation requirements.

The Series 200 Advanced range delivers a new detector platform that incorporates the digital Series 200 Advanced Protocol. This delivers more devices on the loop, gives greater control, configurability and device management.

The Series 200 photo-thermal detector range delivers a consolidated, reliable, high-quality detector platform with digital communication, suitable for medium-to-large applications with simple installation requirements.

Thermal detectors 52051E/EI, 52051HTE/HTEI, 52051RE/REI, are part of S200 range are analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear/raising temperature sensing.

The 6500R and 6500RS are conventional reflector-type linear optical beam smoke detectors, designed to operate as a component of an intelligent fire alarm system and typically used for protecting buildings with large open spaces.

6500 and 6500S are addressable reflector-type linear optical beam smoke detectors, designed to operate as a component of an intelligent fire alarm system and typically used for protecting buildings with large open spaces.

The Multiple Input and Output module provides an easy to install device designed for use in applications where numerous single modules are required.

100x more sensitive than standard smoke sensors, the HS200 is a high gain amplifier-based intelligent smoke sensor, suited to applications where there is substantial downtime cost or a significant investment in equipment has been made.

The 22051EISE photoelectric sensor is a plug in intrinsically safe smoke sensor combining an optical sensing chamber with analogue addressable communications.

The 2251CTLE Multi-Criteria fire sensor combines independent carbon monoxide, photoelectric smoke, thermal heat, and infra-red light sensor working together in one device managed by highly sophisticated and responsive algorithms.

The System Sensor B524IEFT-1 is a specialist base in addition to the traditional low profile or deep bases, designed for use with all System Sensor 200 analogue addressable detectors.

The System Sensor B524HTR is a specialist base in addition to the traditional low profile or deep bases, designed for use with all System Sensor 200 analogue addressable detectors.

The ECO1003A photoelectric smoke detector uses a state-of-the art optical chamber operating on the light scattering principle, combined with an application specific integrated circuit to provide quick and accurate fire detection.

The ECO1002 is a multi-criteria detector uses a state-of-the-art optical chamber and a thermal element combined with a microprocessor, running sophisticated algorithms to provide quick and accurate detection of fires.

The three thermal detectors ECO1004T, ECO1005 & ECO1005T is applicable for small-to-medium sized systems, such as small industrial units, retail units and guest houses.

The 2020P photoelectric smoke detector belongs to System Sensor’s Vision range. This is a range of conventional detectors with an array of installer-friendly features, making them ideal for small, straightforward fire detection systems.

The 2020PT multi-criteria detector belongs to System Sensor’s Vision range. This range of conventional detectors have an array of installer-friendly features, making them ideal for small, straightforward fire detection systems.

The three Vision thermal detectors, 2020F, 2020HF & 2020R use state-of-the-art thermal elements combined with application specific integrated circuits to provide quick and accurate detection of fires through temperature levels or…

The 2351E photoelectric smoke detector forms part of the Series 300 range of conventional detectors. With its multitude of innovative features, the Series 300 is a detector which ‘acts conventionally, thinks intelligently’.

The 2351TEM photoelectric smoke/thermal detector forms part of the Series 300 range of conventional detectors. With its multitude of innovative features, the Series 300 is a detector which ‘acts conventionally, thinks intelligently’.

Series 300 thermal detectors (5351TE, 5351EA & 4351EA) push the boundaries of existing conventional detector technology. They are detectors which ‘act conventionally, think intelligently’.

The InnovairFlex™ D2E 2-wire photoelectric duct smoke detector features versatile mounting options in square or rectangular configuration with modular construction.

The Agile™ Wireless Survey tools forms part of the Agile range of products that cover a wide range of applications where wiring is undesired.

The Agile™ IQ Wireless Software Suite is the ideal compliment to Agile product range to easily accomplish design, survey, commissioning and maintenance tasks.

The Agile™ Wireless USB Dongle forms part of the Agile range of products that cover a wide range of applications where wiring is undesired.

The Agile™ Wireless DKM Call Point forms part of the Agile range of products that cover a wide range of applications where wiring is undesired.

The Agile™ Wireless Fire Detection System is a newly designed platform of wireless fire devices suitable for all applications where wired fire devices cannot be installed for economic or aesthetic reasons.

The Agile™ Wireless Input/Output Module forms part of the Agile range of products that cover a wide range of applications where wiring is undesired.

The Agile™ Wireless Sounder forms part of the Agile range of products that cover a wide range of applications where wiring is undesired.

The Agile™ Wireless Call Point forms part of the Agile range of products that cover a wide range of applications where wiring is undesired.

The Agile™ Wireless Call Point forms part of the Agile range of products that cover a wide range of applications where wiring is undesired.

The FAAST™ Automatic Purging Unit provides a fully integrated and compact solution with user-selectable preventative or event triggered purging programs.

The S300ZDU Zonal Display Unit forms part of the Series 300 conventional detector range, a range which "acts conventionally, thinks intelligently".

The S300PTU Programming and Test Tool is a menu driven device, designed for communication with System Sensor Series 300 detectors, permitting access to various functions…

The CLIP Hole Identification system is designed to alleviate identification issues, by providing a clear, visual indication of sampling point location and its associated hole size.